1 votes

Pas d'Internet, mais le WIFI fonctionne - Ubuntu 17.04 sur Asus TP200SA

J'ai installé Ubuntu 17.04. Il se connecte au WIFI mais l'Internet ne fonctionne pas. J'ai un ASUS TP200SA Avec Ubuntu 16.04 il fonctionnait parfaitement.

Impossible d'utiliser Internet, mais peut se connecter au wifi - Ubuntu 17.04 sur Asus TP200SA

########## wireless info START ##########

Report from: 03 Nov 2016 22:08 MSK +0300

Booted last: 03 Nov 2016 00:00 MSK +0300

Script from: 25 Mar 2017 07:04 UTC +0000

##### release ###########################

Distributor ID: Ubuntu
Description:    Ubuntu 17.04
Release:    17.04
Codename:   zesty

##### kernel ############################

Linux 4.10.0-19-generic #21-Ubuntu SMP Thu Apr 6 17:04:57 UTC 2017 x86\_64 x86\_64 x86\_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=7

##### desktop ###########################

Ubuntu

##### lspci #############################

02:00.0 Network controller \[0280\]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter \[168c:0042\] (rev 30)
    Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter \[1a3b:2231\]
    Kernel driver in use: ath10k\_pci

##### lsusb #############################

Bus 002 Device 002: ID 0781:5590 SanDisk Corp. 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 2188:0ae1  
Bus 001 Device 003: ID 13d3:3491 IMC Networks 
Bus 001 Device 002: ID 0bda:57e6 Realtek Semiconductor Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
1: asus-wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
2: asus-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
3: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

##### lsmod #############################

asus\_nb\_wmi            28672  0
asus\_wmi               28672  1 asus\_nb\_wmi
sparse\_keymap          16384  1 asus\_wmi
ath10k\_pci             45056  0
ath10k\_core           344064  1 ath10k\_pci
ath                    28672  1 ath10k\_core
mac80211              782336  1 ath10k\_core
cfg80211              602112  3 mac80211,ath,ath10k\_core
wmi                    16384  1 asus\_wmi
video                  40960  3 asus\_wmi,int3406\_thermal,i915

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback  brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid\_lft forever preferred\_lft forever
    inet6 ::1/128 scope host 
       valid\_lft forever preferred\_lft forever
2: wlp2s0:  mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether  brd 
    inet 192.168.0.103/24 brd 192.168.0.255 scope global dynamic wlp2s0
       valid\_lft 6844sec preferred\_lft 6844sec
    inet6 fe80::/64 scope link 
       valid\_lft forever preferred\_lft forever

##### iwconfig ##########################

lo        no wireless extensions.

wlp2s0    IEEE 802.11  ESSID:"XXX"  
          Mode:Managed  Frequency:2.437 GHz  Access Point:    
          Bit Rate=1 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=46/70  Signal level=-64 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:56   Missed beacon:0

##### route #############################

default via 192.168.0.1 dev wlp2s0 proto static metric 600 
169.254.0.0/16 dev wlp2s0 scope link metric 1000 
192.168.0.0/24 dev wlp2s0 proto kernel scope link src 192.168.0.103 metric 600 

##### resolv.conf #######################

nameserver 127.0.0.53

##### network managers ##################

Installed:

    NetworkManager

Running:

root      1070     1  1 22:02 ?        00:00:04 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                         wlp2s0
GENERAL.TYPE:                           wifi
GENERAL.NM-TYPE:                        NMDeviceWifi
GENERAL.VENDOR:                         Qualcomm Atheros
GENERAL.PRODUCT:                        QCA9377 802.11ac Wireless Network Adapter
GENERAL.DRIVER:                         ath10k\_pci
GENERAL.DRIVER-VERSION:                 4.10.0-19-generic
GENERAL.FIRMWARE-VERSION:               WLAN.TF.1.0-00267-1
GENERAL.HWADDR:                         
GENERAL.MTU:                            0
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                         0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/net/wlp2s0
GENERAL.IP-IFACE:                       wlp2s0
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                     yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:               no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                   --
GENERAL.CONNECTION:                     XXX
GENERAL.CON-UUID:                       1e837ce9-c2d2-4030-81e9-6a456e657cc2
GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/0
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            no
CAPABILITIES.SPEED:                     1 Mb/s
CAPABILITIES.IS-SOFTWARE:               no
WIFI-PROPERTIES.WEP:                    yes
WIFI-PROPERTIES.WPA:                    yes
WIFI-PROPERTIES.WPA2:                   yes
WIFI-PROPERTIES.TKIP:                   yes
WIFI-PROPERTIES.CCMP:                   yes
WIFI-PROPERTIES.AP:                     yes
WIFI-PROPERTIES.ADHOC:                  yes
WIFI-PROPERTIES.2GHZ:                   yes
WIFI-PROPERTIES.5GHZ:                   yes
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{0}
CONNECTIONS.AVAILABLE-CONNECTIONS\[1\]:   1e837ce9-c2d2-4030-81e9-6a456e657cc2 | XXX
IP4.ADDRESS\[1\]:                         192.168.0.103/24
IP4.GATEWAY:                            192.168.0.1
IP4.ROUTE\[1\]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS\[1\]:                             192.168.0.1
DHCP4.OPTION\[1\]:                        requested\_routers = 1
DHCP4.OPTION\[2\]:                        requested\_domain\_search = 1
DHCP4.OPTION\[3\]:                        requested\_time\_offset = 1
DHCP4.OPTION\[4\]:                        requested\_domain\_name = 1
DHCP4.OPTION\[5\]:                        requested\_rfc3442\_classless\_static\_routes = 1
DHCP4.OPTION\[6\]:                        requested\_broadcast\_address = 1
DHCP4.OPTION\[7\]:                        requested\_netbios\_scope = 1
DHCP4.OPTION\[8\]:                        requested\_wpad = 1
DHCP4.OPTION\[9\]:                        next\_server = 0.0.0.0
DHCP4.OPTION\[10\]:                       expiry = 1478206963
DHCP4.OPTION\[11\]:                       requested\_interface\_mtu = 1
DHCP4.OPTION\[12\]:                       requested\_subnet\_mask = 1
DHCP4.OPTION\[13\]:                       dhcp\_lease\_time = 7200
DHCP4.OPTION\[14\]:                       dhcp\_message\_type = 5
DHCP4.OPTION\[15\]:                       ip\_address = 192.168.0.103
DHCP4.OPTION\[16\]:                       requested\_static\_routes = 1
DHCP4.OPTION\[17\]:                       requested\_domain\_name\_servers = 1
DHCP4.OPTION\[18\]:                       routers = 192.168.0.1
DHCP4.OPTION\[19\]:                       broadcast\_address = 192.168.0.255
DHCP4.OPTION\[20\]:                       requested\_ntp\_servers = 1
DHCP4.OPTION\[21\]:                       requested\_netbios\_name\_servers = 1
DHCP4.OPTION\[22\]:                       domain\_name\_servers = 192.168.0.1
DHCP4.OPTION\[23\]:                       requested\_ms\_classless\_static\_routes = 1
DHCP4.OPTION\[24\]:                       subnet\_mask = 255.255.255.0
DHCP4.OPTION\[25\]:                       network\_number = 192.168.0.0
DHCP4.OPTION\[26\]:                       requested\_host\_name = 1
DHCP4.OPTION\[27\]:                       dhcp\_server\_identifier = 192.168.0.1
IP6.ADDRESS\[1\]:                         fe80::/64
IP6.GATEWAY:                            

SSID                BSSID              MODE   CHAN  FREQ      RATE       SIGNAL  BARS  SECURITY   ACTIVE  \* 
XXX             Infra  6     2437 MHz  54 Mbit/s  61      \_  WPA1 WPA2  yes     \* 
XXX          Infra  4     2427 MHz  54 Mbit/s  54      \_\_  --         no        
SS XXXXX    Infra  11    2462 MHz  54 Mbit/s  24      \_\_\_  --         no        
XXXX          Infra  1     2412 MHz  54 Mbit/s  20      \_\_\_  --         no        
  XXXX      Infra  7     2442 MHz  54 Mbit/s  20      \_\_\_  --         no        
XXXXX          Infra  60    5300 MHz  54 Mbit/s  20      \_\_\_  --         no        

##### NetworkManager.state ##############

\[main\]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager.conf ###############

\[main\]
plugins=ifupdown,keyfile

\[ifupdown\]
managed=false

##### NetworkManager profiles ###########

\[\[/etc/NetworkManager/system-connections/XXX-1e837ce9-c2d2-4030-81e9-6a456e657cc2\]\] (600 root)
\[connection\] id=XXX | type=wifi | permissions=
\[wifi\] mac-address= | mac-address-blacklist= | ssid=XXX
\[ipv4\] method=auto
\[ipv6\] method=ignore

\[\[/etc/NetworkManager/system-connections/XXX\]\] (600 root)
\[connection\] id=XXX | type=wifi | permissions=user:ubuntu:;
\[wifi\] mac-address= | mac-address-blacklist= | ssid=XXX
\[ipv4\] method=auto
\[ipv6\] method=auto

##### iw reg get ########################

Region: Europe/Moscow (based on set time zone)

global
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (N/A, 20), (N/A)
    (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, NO-IR
    (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
    (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, NO-IR
    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, NO-IR
    (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
    (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
    (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

lo        no frequency information.

wlp2s0    32 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz
          Channel 36 : 5.18 GHz
          Channel 40 : 5.2 GHz
          Channel 44 : 5.22 GHz
          Channel 48 : 5.24 GHz
          Channel 52 : 5.26 GHz
          Channel 56 : 5.28 GHz
          Channel 60 : 5.3 GHz
          Channel 64 : 5.32 GHz
          Channel 100 : 5.5 GHz
          Channel 104 : 5.52 GHz
          Channel 108 : 5.54 GHz
          Channel 112 : 5.56 GHz
          Channel 116 : 5.58 GHz
          Channel 120 : 5.6 GHz
          Channel 124 : 5.62 GHz
          Channel 128 : 5.64 GHz
          Channel 132 : 5.66 GHz
          Channel 136 : 5.68 GHz
          Channel 140 : 5.7 GHz
          Current Frequency:2.437 GHz (Channel 6)

##### iwlist scan #######################

lo        Interface doesn't support scanning.

Channel occupancy:

      1   APs on   Frequency:2.427 GHz (Channel 4)
      1   APs on   Frequency:2.437 GHz (Channel 6)
      1   APs on   Frequency:2.442 GHz (Channel 7)
      1   APs on   Frequency:5.3 GHz (Channel 60)

wlp2s0    Scan completed :
          Cell 01 - Address: 
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=51/70  Signal level=-59 dBm  
                    Encryption key:on
                    ESSID:"XXX"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000264a72db17
                    Extra: Last beacon: 92ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 
                    Channel:4
                    Frequency:2.427 GHz (Channel 4)
                    Quality=42/70  Signal level=-68 dBm  
                    Encryption key:off
                    ESSID:"FFFFF"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=0000000036a7949d
                    Extra: Last beacon: 6276ms ago
          Cell 03 - Address: 
                    Channel:60
                    Frequency:5.3 GHz (Channel 60)
                    Quality=23/70  Signal level=-87 dBm  
                    Encryption key:off
                    ESSID:"XDF"
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000037f5194f4
                    Extra: Last beacon: 3840ms ago
          Cell 04 - Address: 
                    Channel:7
                    Frequency:2.442 GHz (Channel 7)
                    Quality=20/70  Signal level=-90 dBm  
                    Encryption key:off
                    ESSID:"  A AAFAQ-NET-12"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000001c88e22d2
                    Extra: Last beacon: 6096ms ago

##### module infos ######################

\[ath10k\_pci\]
filename:       /lib/modules/4.10.0-19-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k\_pci.ko
firmware:       ath10k/QCA9377/hw1.0/board.bin
firmware:       ath10k/QCA9377/hw1.0/firmware-5.bin
firmware:       ath10k/QCA6174/hw3.0/board-2.bin
firmware:       ath10k/QCA6174/hw3.0/board.bin
firmware:       ath10k/QCA6174/hw3.0/firmware-5.bin
firmware:       ath10k/QCA6174/hw3.0/firmware-4.bin
firmware:       ath10k/QCA6174/hw2.1/board-2.bin
firmware:       ath10k/QCA6174/hw2.1/board.bin
firmware:       ath10k/QCA6174/hw2.1/firmware-5.bin
firmware:       ath10k/QCA6174/hw2.1/firmware-4.bin
firmware:       ath10k/QCA9887/hw1.0/board-2.bin
firmware:       ath10k/QCA9887/hw1.0/board.bin
firmware:       ath10k/QCA9887/hw1.0/firmware-5.bin
firmware:       ath10k/QCA988X/hw2.0/board-2.bin
firmware:       ath10k/QCA988X/hw2.0/board.bin
firmware:       ath10k/QCA988X/hw2.0/firmware-5.bin
firmware:       ath10k/QCA988X/hw2.0/firmware-4.bin
firmware:       ath10k/QCA988X/hw2.0/firmware-3.bin
firmware:       ath10k/QCA988X/hw2.0/firmware-2.bin
license:        Dual BSD/GPL
description:    Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices
author:         Qualcomm Atheros
srcversion:     50E531406EF702B9976A8A9
depends:        ath10k\_core
intree:         Y
vermagic:       4.10.0-19-generic SMP mod\_unload 
parm:           irq\_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm:           reset\_mode:0: auto, 1: warm only (default: 0) (uint)

\[ath10k\_core\]
filename:       /lib/modules/4.10.0-19-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k\_core.ko
license:        Dual BSD/GPL
description:    Core module for Qualcomm Atheros 802.11ac wireless LAN cards.
author:         Qualcomm Atheros
srcversion:     1B2C9C18ACF805C04DCA414
depends:        mac80211,cfg80211,ath
intree:         Y
vermagic:       4.10.0-19-generic SMP mod\_unload 
parm:           debug\_mask:Debugging mask (uint)
parm:           uart\_print:Uart target debugging (bool)
parm:           skip\_otp:Skip otp failure for calibration in testmode (bool)
parm:           cryptmod:Crypto mode: 0-hardware, 1-software (uint)
parm:           rawmode:Use raw 802.11 frame datapath (bool)

\[ath\]
filename:       /lib/modules/4.10.0-19-generic/kernel/drivers/net/wireless/ath/ath.ko
license:        Dual BSD/GPL
description:    Shared library for Atheros wireless LAN cards.
author:         Atheros Communications
srcversion:     4B8612B6FF71DD27AE8CE67
depends:        cfg80211
intree:         Y
vermagic:       4.10.0-19-generic SMP mod\_unload 

\[mac80211\]
filename:       /lib/modules/4.10.0-19-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     6FCDB39CB1DCCA0C9A450B2
depends:        cfg80211
intree:         Y
vermagic:       4.10.0-19-generic SMP mod\_unload 
parm:           minstrel\_vht\_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max\_nullfunc\_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max\_probe\_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon\_loss\_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe\_wait\_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211\_default\_rc\_algo:Default rate control algorithm for mac80211 to use (charp)

\[cfg80211\]
filename:       /lib/modules/4.10.0-19-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     0ADFC23D0B6BCD6916160E7
depends:        
intree:         Y
vermagic:       4.10.0-19-generic SMP mod\_unload 
parm:           bss\_entries\_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211\_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211\_disable\_40mhz\_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

\[ath10k\_pci\]
irq\_mode: 0
reset\_mode: 0

\[ath10k\_core\]
cryptmode: 0
debug\_mask: 0
rawmode: N
skip\_otp: N
uart\_print: N

\[mac80211\]
beacon\_loss\_count: 7
ieee80211\_default\_rc\_algo: minstrel\_ht
max\_nullfunc\_tries: 2
max\_probe\_tries: 5
minstrel\_vht\_only: Y
probe\_wait\_ms: 500

\[cfg80211\]
bss\_entries\_limit: 1000
cfg80211\_disable\_40mhz\_24ghz: N
ieee80211\_regdom: 00

##### /etc/modules ######################

##### modprobe options ##################

\[/etc/modprobe.d/blacklist-ath\_pci.conf\]
blacklist ath\_pci

\[/etc/modprobe.d/blacklist.conf\]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd\_intel8x0m
blacklist snd\_aw2
blacklist i2c\_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin\_gps
blacklist asus\_acpi
blacklist snd\_pcsp
blacklist pcspkr
blacklist amd76x\_edac

\[/etc/modprobe.d/blacklist-rare-network.conf\]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

\[/etc/modprobe.d/intel-microcode-blacklist.conf\]
blacklist microcode

\[/etc/modprobe.d/iwlwifi.conf\]
remove iwlwifi \\
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \\
&& /sbin/modprobe -r mac80211

\[/etc/modprobe.d/mlx4.conf\]
softdep mlx4\_core post: mlx4\_en

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

##### udev rules ########################

##### dmesg #############################

\[   80.837828\] ath10k\_pci 0000:02:00.0: pci irq msi oper\_irq\_mode 2 irq\_mode 0 reset\_mode 0
\[   81.150511\] ath10k\_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
\[   81.150548\] ath10k\_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
\[   81.160059\] ath10k\_pci 0000:02:00.0: qca9377 hw1.0 target 0x05020000 chip\_id 0x003820ff sub 1a3b:2231
\[   81.160065\] ath10k\_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
\[   81.160765\] ath10k\_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
\[   81.264561\] ath10k\_pci 0000:02:00.0: board\_file api 2 bmi\_id N/A crc32 93da0176
\[   83.826131\] ath10k\_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
\[   83.833863\] ath: EEPROM regdomain: 0x6a
\[   83.833866\] ath: EEPROM indicates we should expect a direct regpair map
\[   83.833869\] ath: Country alpha2 being used: 00
\[   83.833870\] ath: Regpair used: 0x6a
\[   83.880104\] ath10k\_pci 0000:02:00.0 wlp2s0: renamed from wlan0
\[   84.348659\] IPv6: ADDRCONF(NETDEV\_UP): wlp2s0: link is not ready (repeated 5 times)
\[   93.359619\] wlp2s0: authenticate with 
\[   93.395340\] wlp2s0: send auth to  (try 1/3)
\[   93.397647\] wlp2s0: authenticated
\[   93.399774\] wlp2s0: associate with  (try 1/3)
\[   93.405206\] wlp2s0: RX AssocResp from  (capab=0x431 status=0 aid=5)
\[   93.416109\] wlp2s0: associated
\[   93.416202\] IPv6: ADDRCONF(NETDEV\_CHANGE): wlp2s0: link becomes ready

########## wireless info END ############

De même, si je connecte mon téléphone via une connexion Bluetooth, Internet ne fonctionne pas et via USB-Internet non plus.

Désolé, j'ai dû poser cette question à nouveau et supprimer mon ancienne question, car j'ai posté quelque chose de mal.

1voto

Ian Suttle Points 2225

Modifions un seul fichier. Ouvrez un terminal et faites :

gksudo gedit /etc/NetworkManager/NetworkManager.conf

Utilisez nano ou kate ou leafpad si vous n'avez pas l'éditeur de texte gedit. Ajoutez des lignes :

[device]
wifi.scan-rand-mac-address=0

Enregistrez et fermez le fichier puis redémarrez.

Je vous suggère également de vérifier les paramètres du routeur. Il est préférable d'opter pour WPA2-AES, mais pas pour un mode mixte WPA et WPA2 et certainement pas pour TKIP. Deuxièmement, si votre routeur est capable d'atteindre des vitesses N, vous aurez peut-être une meilleure connectivité avec une largeur de canal de 20 MHz dans la bande 2,4 GHz au lieu des 20/40 MHz automatiques, bien que cela soit susceptible d'affecter les vitesses N. J'ai également plus de chance avec un canal fixe, soit 1, 6 ou 11, plutôt qu'avec la sélection automatique des canaux. De plus, assurez-vous que le routeur n'est pas configuré pour utiliser uniquement les vitesses N ; il est préférable d'utiliser les vitesses B, G et N automatiques. Après avoir effectué ces modifications, redémarrez le routeur.

Ensuite, je recommande de définir explicitement votre domaine réglementaire. Vérifiez le vôtre :

sudo iw reg get

Si vous obtenez 00, c'est un réglage unique qui peut convenir à tous. Trouvez la vôtre ici : http://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 Puis le fixer temporairement :

sudo iw reg set IS

Bien sûr, remplacez le code de votre pays si ce n'est pas l'Islande. Définissez-le de façon permanente :

gksudo gedit /etc/default/crda

Utilisez nano ou kate ou leafpad si vous n'avez pas l'éditeur de texte gedit.

Changez la dernière ligne pour lire :

REGDOMAIN=IS

Relisez attentivement, enregistrez et fermez l'éditeur de texte.

SistemesEz.com

SystemesEZ est une communauté de sysadmins où vous pouvez résoudre vos problèmes et vos doutes. Vous pouvez consulter les questions des autres sysadmins, poser vos propres questions ou résoudre celles des autres.

Powered by:

X