Le ventilateur n'est pas détecté par les capteurs lm

Mon ventilateur souffle fort, alors que la température de mon processeur est de 32 degrés.

J'ai essayé beaucoup de choses pour contrôler mon ventilateur.

Fichier Grub modifié

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi= pci=noacpi"

_

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=\"Linux\""

Ran sensors-detect :

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK

Ran sensors :

acpitz-virtual-0
Adapter: Virtual device
temp1:        +34.0°C  (crit = +90.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +34.0°C  (high = +80.0°C, crit = +90.0°C)
Core 2:       +34.0°C  (high = +80.0°C, crit = +90.0°C)

Ran sudo start module-init-tools y sudo start module-init-tools

module-init-tools stop/waiting

Comme vous pouvez le voir, mon ventilateur n'est pas détecté.

Running fancontrol me donne ça :

Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file

Pouvez-vous m'aider, s'il vous plaît ? Je ne peux plus utiliser mon ordinateur portable en classe.

Merci d'avance.

Mon Ubuntu 11.10 système

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series]
01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)

EDIT

Je viens d'installer Lubuntu et lm-sensors n'a aucun problème pour détecter mes deux ventilateurs.