Vous avez posé beaucoup de questions en une seule, mais je vais vous aider avec autant d'entre elles que possible.
Tout d'abord, vous devez ajouter le serveur IRC de votre choix - lancez irssi, et tapez ce qui suit :
/server add -auto -network Freenode irc.freenode.net 6667
Cela ajoutera le réseau IRC Freenode à votre configuration IRSSI, et se connectera automatiquement lorsque vous lancerez la commande irssi .
/network add -nick <your-nick> Freenode
Cela ajoutera votre pseudo à la nouvelle Freenode et utilisera automatiquement ce pseudo à chaque fois qu'il se connectera au réseau.
/channel add -auto #ubuntu Freenode
Cela vous fera rejoindre #ubuntu sur Freenode à chaque fois que vous lancez irssi.
En supposant que vous avez enregistré votre pseudo, vous pouvez le faire pour vous identifier automatiquement :
/network add -autosendcmd "/msg nickserv identify password ;wait 2000" Freenode
Vous pouvez passer d'un canal à l'autre avec Alt - 2 , Alt - 3 etc., chaque canal étant Alt - Number
Si vous êtes intéressé, voici mon ~/.irrsi/config fichier :
servers = (
{ address = "irc.ubuntu.com"; chatnet = "Ubuntu"; port = "8001"; },
#There is actually very little difference between irc.ubuntu.com
# and irc.freenode.net - irc.u.c is just a redirect
{
address = "irc.freenode.net";
chatnet = "Freenode";
port = "6667";
use_ssl = "no";
ssl_verify = "no";
autoconnect = "yes";
}
);
# I'm a freenode user all the way man
chatnets = {
Freenode = {
type = "IRC";
nick = "changeme";
autosendcmd = "/msg nickserv identify <password removed> ;wait 2000";
};
};
# Channels I hang out in a lot. Change these to your own.
channels = (
{ name = "#2buntu"; chatnet = "Freenode"; autojoin = "yes"; },
);
aliases = {
J = "join";
WJOIN = "join -window";
WQUERY = "query -window";
LEAVE = "part";
BYE = "quit";
EXIT = "quit";
SIGNOFF = "quit";
DESCRIBE = "action";
DATE = "time";
HOST = "userhost";
LAST = "lastlog";
SAY = "msg *";
WI = "whois";
WII = "whois $0 $0";
WW = "whowas";
W = "who";
N = "names";
M = "msg";
T = "topic";
C = "clear";
CL = "clear";
K = "kick";
KB = "kickban";
KN = "knockout";
BANS = "ban";
B = "ban";
MUB = "unban *";
UB = "unban";
IG = "ignore";
UNIG = "unignore";
SB = "scrollback";
UMODE = "mode $N";
WC = "window close";
WN = "window new hide";
SV = "say Irssi $J ($V) - http://irssi.org/";
GOTO = "sb goto";
CHAT = "dcc chat";
RUN = "SCRIPT LOAD";
CALC = "exec - if command -v bc >/dev/null 2>&1\\; then printf '%s=' '$*'\\; echo '$*' | bc -l\\; else echo bc was not found\\; fi";
SBAR = "STATUSBAR";
INVITELIST = "mode $C +I";
Q = "QUERY";
"MANUAL-WINDOWS" = "set use_status_window off;set autocreate_windows off;set autocreate_query_level none;set autoclose_windows off;set reuse_unused_windows on;save";
EXEMPTLIST = "mode $C +e";
ATAG = "WINDOW SERVER";
UNSET = "set -clear";
RESET = "set -default";
};
statusbar = {
# formats:
# when using {templates}, the template is shown only if it's argument isn't
# empty unless no argument is given. for example {sb} is printed always,
# but {sb $T} is printed only if $T isn't empty.
items = {
# start/end text in statusbars
barstart = "{sbstart}";
barend = "{sbend}";
topicbarstart = "{topicsbstart}";
topicbarend = "{topicsbend}";
# treated "normally", you could change the time/user name to whatever
time = "{sb $Z}";
user = "{sb {sbnickmode $cumode}$N{sbmode $usermode}{sbaway $A}}";
# treated specially .. window is printed with non-empty windows,
# window_empty is printed with empty windows
window = "{sb $winref:$tag/$itemname{sbmode $M}}";
window_empty = "{sb $winref{sbservertag $tag}}";
prompt = "{prompt $[.15]itemname}";
prompt_empty = "{prompt $winname}";
topic = " $topic";
topic_empty = " Irssi v$J - http://www.irssi.org";
# all of these treated specially, they're only displayed when needed
lag = "{sb Lag: $0-}";
act = "{sb Act: $0-}";
more = "-- more --";
};
# there's two type of statusbars. root statusbars are either at the top
# of the screen or at the bottom of the screen. window statusbars are at
# the top/bottom of each split window in screen.
default = {
# the "default statusbar" to be displayed at the bottom of the window.
# contains all the normal items.
window = {
disabled = "no";
# window, root
type = "window";
# top, bottom
placement = "bottom";
# number
position = "1";
# active, inactive, always
visible = "active";
# list of items in statusbar in the display order
items = {
barstart = { priority = "100"; };
time = { };
user = { };
window = { };
window_empty = { };
lag = { priority = "-1"; };
act = { priority = "10"; };
more = { priority = "-1"; alignment = "right"; };
barend = { priority = "100"; alignment = "right"; };
};
};
# statusbar to use in inactive split windows
window_inact = {
type = "window";
placement = "bottom";
position = "1";
visible = "inactive";
items = {
barstart = { priority = "100"; };
window = { };
window_empty = { };
more = { priority = "-1"; alignment = "right"; };
barend = { priority = "100"; alignment = "right"; };
};
};
# we treat input line as yet another statusbar :) It's possible to
# add other items before or after the input line item.
prompt = {
type = "root";
placement = "bottom";
# we want to be at the bottom always
position = "100";
visible = "always";
items = {
prompt = { priority = "-1"; };
prompt_empty = { priority = "-1"; };
# treated specially, this is the real input line.
input = { priority = "10"; };
};
};
# topicbar
topic = {
type = "root";
placement = "top";
position = "1";
visible = "always";
items = {
topicbarstart = { priority = "100"; };
topic = { };
topic_empty = { };
topicbarend = { priority = "100"; alignment = "right"; };
};
};
};
};
settings = {
core = { real_name = "Unknown"; user_name = "<your_user_name>"; nick = "<your_nick>"; };
"fe-text" = { actlist_sort = "refnum"; };
};
Si vous aimez ajouter toutes sortes de fonctionnalités, vous devriez jeter un coup d'œil à l'outil de gestion de l'information de l'UE. irssi scripts site - il y a tous types de petits bijoux là-bas.
