Comment faire en sorte que Linux reconnaisse un nouveau disque SATA /dev/sda que j'ai inséré à chaud sans redémarrer ?

L'échange à chaud d'un disque SATA /dev/sda défaillant a bien fonctionné, mais lorsque j'ai voulu insérer un nouveau disque, il n'a pas été reconnu :

[root@fs-2 ~]# tail -18 /var/log/messages
May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake }
May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0)
May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset
May 5 16:54:45 fs-2 kernel: ata1: soft resetting link
May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0)
May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16)
May 5 16:54:55 fs-2 kernel: ata1: soft resetting link
May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0)
May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16)
May 5 16:55:05 fs-2 kernel: ata1: soft resetting link
May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0)
May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16)
May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps
May 5 16:55:40 fs-2 kernel: ata1: soft resetting link
May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16)
May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up
May 5 16:55:45 fs-2 kernel: ata1: EH complete

J'ai essayé plusieurs choses pour que le serveur trouve le nouveau /dev/sda, comme par exemple rescan-scsi-bus.sh mais ils n'ont pas fonctionné :

[root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan
-bash: echo: write error: Invalid argument
[root@fs-2 ~]#
[root@fs-2 ~]# /root/rescan-scsi-bus.sh -l
[snip]
0 new device(s) found.
0 device(s) removed.
[root@fs-2 ~]#
[root@fs-2 ~]# ls /dev/sda
ls: /dev/sda: No such file or directory

J'ai fini par redémarrer le serveur. /dev/sda a été reconnu, j'ai réparé le RAID logiciel et tout va bien maintenant. Mais pour la prochaine fois, Comment faire pour que Linux reconnaisse un nouveau disque SATA que j'ai inséré à chaud sans redémarrer ?

Le système d'exploitation en question est RHEL5.3 :

[root@fs-2 ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.3 (Tikanga)

Le disque dur est un Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, modèle ST3500320NS.

Voici la sortie de lscpi :

[root@fs-2 ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02)
04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06)
04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06)

Mise à jour : Dans une douzaine de cas, nous avons été contraints de redémarrer les serveurs parce que la permutation à chaud ne fonctionnait pas. Merci pour les réponses qui m'ont incité à me pencher davantage sur le contrôleur SATA. J'ai inclus la sortie lspci pour le système problématique ci-dessus (nom d'hôte : fs-2). J'aurais encore besoin d'aide pour comprendre ce qui n'est pas pris en charge au niveau matériel en termes d'échange à chaud pour ce système. N'hésitez pas à me faire part de tout autre résultat que lspci qui pourrait être utile.

La bonne nouvelle est que la permutation à chaud a "fonctionné" aujourd'hui sur l'un de nos serveurs (nom d'hôte : www-1), ce qui est très rare pour nous. Voici la sortie de lspci :

[root@www-1 ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02)
04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06)
04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06)
09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)