J'ai reçu un ordinateur portable (DELL Latitude E7450) avec un SSD défaillant. Windows est bloqué dans la boucle de démarrage, sans qu'aucun outil de réparation/sauvetage standard ne fonctionne.
Ce que j'avais fait de ce moment :
- J'ai confirmé la boucle d'amorçage.
- Le bios reconnaît le SSD.
- Les diagnostics préalables à l'amorçage n'ont révélé qu'une erreur concernant le disque SSD :
Code d'erreur : 2000-0142
- Élément de la liste
Heureusement, le disque est lisible et peut être monté sous Linux (Lubuntu 20.10) à partir du pendrive.
- J'ai copié les fichiers les plus importants sur le disque dur (en utilisant le gestionnaire de fichiers Lubuntu).
- J'ai vérifié le SSD avec gsmartcontrol. Il y a des erreurs dans l'autotest court et l'autotest étendu. Les attributs SMART ne sont pas clairs pour moi, donc J'aimerais que vous m'aidiez à comprendre l'état de santé du disque, la source des problèmes éventuels et si le disque peut être réparé ou si je dois recommander l'achat d'un nouveau disque.
Par ailleurs, pourriez-vous nous indiquer la meilleure commande pour copier toutes les données intactes d'un disque SSD vers un autre disque ? Je suis presque sûr d'avoir tous les fichiers importants, mais je préfère toujours copier tout le disque par sécurité. Je ne veux pas sursolliciter le SSD endommagé( ?) au point de le rendre irrécupérable.
Vous trouverez ci-dessous le rapport complet de gsmartcontrol :
smartctl 7.1 2019-12-30 r5022 \[x86\_64-linux-5.8.0-25-generic\] (local build)
=== START OF INFORMATION SECTION ===
Model Family: SK hynix SATA SSDs
Device Model: SK hynix SC300 mSATA 512GB
Serial Number: FJ56N651311006P18
Firmware Version: 20001P00
User Capacity: 512,110,190,592 bytes \[512 GB\]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: mSATA
Device is: In smartctl database \[for details use: -P show\]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Mar 15 11:45:11 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen \[SEC2\]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x06) Offline data collection activity
was aborted by the device with a fatal error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 118) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 2) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE\_NAME FLAGS VALUE WORST THRESH FAIL RAW\_VALUE
1 Raw\_Read\_Error\_Rate POSR-- 166 166 006 - 0
5 Retired\_Block\_Count -O--CK 253 253 036 - 0
9 Power\_On\_Hours -O--CK 093 093 000 - 6586
12 Power\_Cycle\_Count -O--CK 100 100 020 - 3806
100 Total\_Erase\_Count -O--CK 100 100 000 - 10782675
171 Program\_Fail\_Count -O--CK 100 100 000 - 1
172 Erase\_Fail\_Count -O--CK 253 253 000 - 0
174 Unexpect\_Power\_Loss\_Ct ----CK 100 100 000 - 260
175 Program\_Fail\_Count\_Chip -O--CK 100 100 000 - 1
176 Unused\_Rsvd\_Blk\_Cnt\_Tot -O--CK 253 253 000 - 0
177 Wear\_Leveling\_Count -O--CK 098 098 000 - 76
178 Used\_Rsvd\_Blk\_Cnt\_Chip -O--CK 100 100 000 - 49
179 Used\_Rsvd\_Blk\_Cnt\_Tot -O--CK 100 100 000 - 511
180 Erase\_Fail\_Count -O--CK 100 100 000 - 8321
181 Non4k\_Aligned\_Access -O--CK 100 100 000 - 1
182 Erase\_Fail\_Count\_Total -O--CK 253 253 000 - 0
183 SATA\_Downshift\_Count -O--CK 100 100 000 - 2
187 Reported\_Uncorrect -O--CK 100 100 000 - 2336
188 Command\_Timeout -O--CK 253 253 000 - 0
191 Unknown\_SSD\_Attribute -O--CK 253 253 000 - 0
194 Temperature\_Celsius -O---- 030 000 000 - 30 (0 254 0 127 0)
195 Hardware\_ECC\_Recovered -O--CK 100 100 000 - 20375846
201 Percent\_Lifetime\_Remain -OSR-- 100 100 000 - 0
204 Soft\_ECC\_Correction -OSR-- 100 100 000 - 1
231 SSD\_Life\_Left PO--CK 253 253 010 - 0
234 Unknown\_SK\_hynix\_Attrib -O--CK 100 100 000 - 38951
241 Total\_Writes\_GiB -O--CK 100 100 000 - 13632
242 Total\_Reads\_GiB -O--CK 100 100 000 - 22696
250 Read\_Retry\_Count -O--CK 100 100 000 - 190010
||||||\_ K auto-keep
|||||\_\_ C event count
||||\_\_\_ R error rate
|||\_\_\_\_ S speed/performance
||\_\_\_\_\_ O updated online
|\_\_\_\_\_\_ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 \[multi-sector log support\]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL R/O 2 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 65535 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA\_48 = Upper bytes of LBA High/Mid/Low Registers \] ATA-8
LH = LBA High (was: Cylinder High) Register \] LBA
LM = LBA Mid (was: Cylinder Low) Register \] Register
LL = LBA Low (was: Sector Number) Register \]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered\_Up\_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 \[7\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 d8 00 00 00 73 dd 60 40 40 00:33:19.940 READ FPDMA QUEUED
60 01 00 00 d0 00 00 00 73 dc 60 40 40 00:33:19.940 READ FPDMA QUEUED
60 01 00 00 c8 00 00 00 73 db 60 40 40 00:33:19.940 READ FPDMA QUEUED
60 01 00 00 c0 00 00 00 73 da 60 40 40 00:33:19.940 READ FPDMA QUEUED
60 00 01 00 b8 00 00 00 73 d9 5f 40 40 00:33:19.940 READ FPDMA QUEUED
Error 65534 \[6\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 30 00 00 00 73 d9 60 40 40 00:33:19.880 READ FPDMA QUEUED
60 01 00 00 28 00 00 00 73 d8 60 40 40 00:33:19.880 READ FPDMA QUEUED
60 00 01 00 20 00 00 00 73 d7 5f 40 40 00:33:19.880 READ FPDMA QUEUED
60 00 01 00 18 00 00 00 73 d7 5e 40 40 00:33:19.880 READ FPDMA QUEUED
60 00 01 00 10 00 00 00 73 d7 5d 40 40 00:33:19.880 READ FPDMA QUEUED
Error 65533 \[5\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 c0 00 00 00 73 d6 60 40 40 00:33:19.810 READ FPDMA QUEUED
60 01 00 00 b8 00 00 00 73 d5 60 40 40 00:33:19.810 READ FPDMA QUEUED
60 01 00 00 b0 00 00 00 73 d4 60 40 40 00:33:19.810 READ FPDMA QUEUED
60 01 00 00 a8 00 00 00 73 d3 60 40 40 00:33:19.800 READ FPDMA QUEUED
60 01 00 00 a0 00 00 00 73 d2 60 40 40 00:33:19.800 READ FPDMA QUEUED
Error 65532 \[4\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 98 00 00 01 20 41 a0 40 40 00:33:19.740 READ FPDMA QUEUED
60 01 00 00 90 00 00 00 73 cc 60 40 40 00:33:19.740 READ FPDMA QUEUED
60 01 00 00 88 00 00 00 73 cb 60 40 40 00:33:19.740 READ FPDMA QUEUED
60 01 00 00 80 00 00 00 73 ca 60 40 40 00:33:19.740 READ FPDMA QUEUED
60 01 00 00 78 00 00 00 73 c9 60 40 40 00:33:19.740 READ FPDMA QUEUED
Error 65531 \[3\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 b8 00 00 00 73 b9 60 40 40 00:33:19.660 READ FPDMA QUEUED
60 00 80 00 b0 00 00 00 73 b8 e0 40 40 00:33:19.660 READ FPDMA QUEUED
60 00 20 00 a8 00 00 00 71 b8 e8 40 40 00:33:19.660 READ FPDMA QUEUED
60 00 08 00 a0 00 00 00 71 b8 e0 40 40 00:33:19.660 READ FPDMA QUEUED
60 00 08 00 98 00 00 01 74 12 58 40 40 00:33:19.660 READ FPDMA QUEUED
Error 65530 \[2\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 28 00 00 00 73 dc 60 40 40 00:01:26.040 READ FPDMA QUEUED
60 01 00 00 20 00 00 00 73 db 60 40 40 00:01:26.040 READ FPDMA QUEUED
60 01 00 00 18 00 00 00 73 da 60 40 40 00:01:26.040 READ FPDMA QUEUED
60 00 01 00 10 00 00 00 73 d9 5f 40 40 00:01:26.040 READ FPDMA QUEUED
60 00 01 00 08 00 00 00 73 d9 5e 40 40 00:01:26.040 READ FPDMA QUEUED
Error 65529 \[1\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 00 00 73 d8 60 40 40 00:01:25.970 READ FPDMA QUEUED
60 00 01 00 f8 00 00 00 73 d7 5f 40 40 00:01:25.970 READ FPDMA QUEUED
60 00 01 00 b8 00 00 00 73 d7 5e 40 40 00:01:25.970 READ FPDMA QUEUED
60 00 01 00 b0 00 00 00 73 d7 5d 40 40 00:01:25.970 READ FPDMA QUEUED
60 00 01 00 a8 00 00 00 73 d7 5c 40 40 00:01:25.970 READ FPDMA QUEUED
Error 65528 \[0\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 78 00 00 00 73 d6 60 40 40 00:01:25.890 READ FPDMA QUEUED
60 01 00 00 70 00 00 00 73 d5 60 40 40 00:01:25.890 READ FPDMA QUEUED
60 01 00 00 68 00 00 00 73 d4 60 40 40 00:01:25.890 READ FPDMA QUEUED
60 01 00 00 60 00 00 00 73 d3 60 40 40 00:01:25.890 READ FPDMA QUEUED
60 01 00 00 58 00 00 00 73 d2 60 40 40 00:01:25.890 READ FPDMA QUEUED
Error 65527 \[19\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 98 00 00 01 20 41 a0 40 40 00:01:25.820 READ FPDMA QUEUED
60 01 00 00 90 00 00 00 73 cc 60 40 40 00:01:25.820 READ FPDMA QUEUED
60 01 00 00 88 00 00 00 73 cb 60 40 40 00:01:25.820 READ FPDMA QUEUED
60 01 00 00 80 00 00 00 73 ca 60 40 40 00:01:25.820 READ FPDMA QUEUED
60 01 00 00 78 00 00 00 73 c9 60 40 40 00:01:25.820 READ FPDMA QUEUED
Error 65526 \[18\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 40 00 00 00 73 b9 60 40 40 00:01:25.740 READ FPDMA QUEUED
60 00 80 00 38 00 00 00 73 b8 e0 40 40 00:01:25.740 READ FPDMA QUEUED
60 00 20 00 30 00 00 00 71 b8 e8 40 40 00:01:25.740 READ FPDMA QUEUED
60 00 08 00 28 00 00 00 71 b8 e0 40 40 00:01:25.740 READ FPDMA QUEUED
60 00 08 00 20 00 00 01 74 12 58 40 40 00:01:25.740 READ FPDMA QUEUED
Error 65525 \[17\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.750 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.720 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.720 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.670 IDENTIFY DEVICE
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.600 SECURITY FREEZE LOCK
Error 65524 \[16\] occurred at disk power-on lifetime: 6585 hours (274 days + 9 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.750 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.720 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.720 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.670 IDENTIFY DEVICE
f5 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.600 SECURITY FREEZE LOCK
Error 65523 \[15\] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 f8 00 00 02 4c 8c f0 40 40 09:28:50.970 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 09:28:50.970 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 09:28:50.970 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 09:28:50.970 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 09:28:50.970 IDENTIFY DEVICE
Error 65522 \[14\] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 d0 00 00 02 4c 8c f0 40 40 09:28:50.920 READ FPDMA QUEUED
60 00 08 00 c8 00 00 02 4c 8d b0 40 40 09:28:50.920 READ FPDMA QUEUED
60 00 08 00 c0 00 00 02 4c 8d a8 40 40 09:28:50.920 READ FPDMA QUEUED
60 00 08 00 b8 00 00 02 4c 8d a0 40 40 09:28:50.920 READ FPDMA QUEUED
60 00 08 00 b0 00 00 02 4c 8d 98 40 40 09:28:50.920 READ FPDMA QUEUED
Error 65521 \[13\] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 70 00 00 02 4c 8c f0 40 40 09:28:50.870 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 09:28:50.870 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 09:28:50.870 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 09:28:50.870 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 09:28:50.870 IDENTIFY DEVICE
Error 65520 \[12\] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 70 00 00 02 4c 8c f0 40 40 09:28:50.830 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 09:28:50.830 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 09:28:50.830 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 09:28:50.830 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 09:28:50.830 IDENTIFY DEVICE
Error 65519 \[11\] occurred at disk power-on lifetime: 6583 hours (274 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 60 00 00 02 4c 8c f0 40 40 09:28:50.780 READ FPDMA QUEUED
60 00 08 00 58 00 00 02 4c 8c e8 40 40 09:28:50.780 READ FPDMA QUEUED
60 00 08 00 50 00 00 02 4c 8c e0 40 40 09:28:50.780 READ FPDMA QUEUED
60 00 08 00 48 00 00 02 4c 8c d8 40 40 09:28:50.780 READ FPDMA QUEUED
60 00 08 00 40 00 00 02 4c 8c d0 40 40 09:28:50.780 READ FPDMA QUEUED
Error 65518 \[10\] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 08 00 00 02 33 10 28 40 40 08:43:42.150 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 08:43:42.140 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 08:43:42.140 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 08:43:42.140 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 08:43:42.140 IDENTIFY DEVICE
Error 65517 \[9\] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 00 00 00 02 33 10 28 40 40 08:43:42.100 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 08:43:42.100 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 08:43:42.100 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 08:43:42.100 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 08:43:42.100 IDENTIFY DEVICE
Error 65516 \[8\] occurred at disk power-on lifetime: 6582 hours (274 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA\_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA\_48 LH LM LL DV DC Powered\_Up\_Time Command/Feature\_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 70 00 00 02 33 10 28 40 40 08:43:42.050 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 08 30 a0 a0 08:43:42.050 READ LOG EXT
ef 00 10 00 02 00 00 00 00 00 00 a0 a0 08:43:42.050 SET FEATURES \[Enable SATA feature\]
27 00 00 00 00 00 00 00 00 00 00 e0 e0 08:43:42.050 READ NATIVE MAX ADDRESS EXT \[OBS-ACS-3\]
ec 00 00 00 00 00 00 00 00 00 00 a0 a0 08:43:42.050 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test\_Description Status Remaining LifeTime(hours) LBA\_of\_first\_error
# 1 Short offline Completed: read failure 60% 6585 1309200
# 2 Extended offline Completed: read failure 90% 6585 1309064
# 3 Short offline Completed: read failure 60% 6585 1309200
# 4 Short offline Completed: read failure 60% 6573 1309200
# 5 Short offline Completed without error 00% 8 -
# 6 Short offline Completed without error 00% 1 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||\_ C monitored condition met
||\_\_ D supports DSN
|\_\_\_ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
